How to Develop a Successful Asset Management Strategy During the Coronavirus Downturn
COVID-19 is disrupting all sectors including asset management - plants
around the world are operating in emergency mode or are shut down
completely. There is no hint about how long the situation will last
nor can anyone realistically predict the scope of the economic impact
it will have. Therefore it is crucial to minimize costs while not
compromising the effectiveness of the plants. These 6 recommendations
will help you to align your asset management according to requirements
and turn the challenges into opportunities.
By Frank Uwe Hess
The "bull market" has collapsed. For eleven years, stock market prices knew only one direction: up. COVID-19 suddenly put an end to the seemingly eternal upward trend. A global recession seems inevitable. The only question that no one can seriously answer at the moment is: Which development will the recession take? Economists distinguish between so-called "V", "L" or "U" movements depending on the curve shape. Within a few days, companies had to drastically limit their supply capacities. Airlines, travel agencies, hotels, car manufacturers, suppliers - all sectors are increasingly affected. Even the first production facilities - among others Mercedes, VW, Tesla or Schaeffler - will be idle for the next 4-6 weeks. And almost every day more companies follow suit with no end in sight.
Currently, the maintenance community is no longer concerned with
optimizing availability. Instead, those involved are fighting to cut
costs without jeopardizing the reliability and safety of the assets.
In order to make this balancing act - and thus the crisis - as
successful as possible, clear and unambiguous leadership is required.
But what does good crisis management look like during these times when
COVID-19 is dictating all aspects of human activity? We present six
recommendations to help you optimize your asset management decisions
during this unprecedented time and to emerge from the COVID-19
slowdown unscathed and ready when business returns.
Prepare your organization for earlier, legally or technically required plant shutdowns that were originally scheduled for late 2020 or 2021. Above all, check whether the necessary requirements are met. In other words, sufficient staff must be available both at your service providers and in your own company as soon as the current lockdown ends. If we have learned one thing from the 2008/2009 financial crisis, it is that the global economy will need around two years to fully recover from a shock of this magnitude. Conversely, demand and product prices will drop significantly over the next few months. The advantage: This also applies to almost all service and material costs. Use this “window of opportunity” wisely.
We all know that maintenance has to help reduce costs in times of tight budgets. However, if you reduce your maintenance costs across the board, you will feel the effects all the more clearly in a year or two - exactly in the period when the economy - presumably - is slowly picking up speed again. For you, this would mean that if the demand on the market picked up again, you would not be able to deliver the required plant availability that is in demand. So check very carefully and systematically where you can reduce your costs with the least possible risk so as not to accidentally cause long-term competitive disadvantages.
Turnaround (TA) work packages related to expansive capital investments should be challenged immediately. However, all work packages that serve cost-effective production should remain in the TA-Scope. Investments that don’t reduce cost in the near-term should be delayed until the economic forecasts look brighter. The same analysis should be applied to work packages that exceed the legally required examinations. So minimize your TA-Scope as much as possible. Due to probable resource bottlenecks, it may be more cost-effective to run two small Turnarounds, rather than one big, complex one.
Nothing increases Mean Time Between Failures more than the consistent monitoring of wear and tear, the main cause of most system failures. If assets are bucking, make noises, become hot or dirty, they will not last as long as their quiet, cool and clean counterparts. Let your plant operators know the optimal reference conditions for fasteners, lubrication, alignment and balance, and improve communication between production and maintenance.
Almost every company that we have worked for in the past 25 years routinely performs PdM (Predictive Maintenance) work that is inefficient. Optimize all maintenance and inspection plans that have a high proportion of corrective costs despite defined PdM measures. Because the expected level of production is likely to be relatively low in the next few months, you should take the opportunity to carry out a root cause analysis of your major system failures ('bad actors'). Bad actors all too often fly under the radar, but are responsible for a high proportion of unplanned maintenance and excessive maintenance cost. These are malfunctions which, although they do not have a great impact on the availability of the system, can (as a whole) cause high costs. Your operators and engineers can also easily carry out a bad actor analysis and the associated PdM optimization from the home office. Use the current situation and available time capacities to significantly reduce disruption costs in the future.
It is clear that the lower market demand will lead to a decrease in production volume. For maintenance, this means switching from an availability-driven strategy to a cost-oriented strategy. Therefore, evaluate all maintenance measures with regard to their contribution to availability and the associated maintenance effort. Check all static maintenance strategies according to the new availability conditions and delete, stretch or postpone as many measures as possible without unnecessarily increasing the risk of failure beyond the desired availability level or violating legal provisions. Convert your maintenance to a 'demand driven maintenance model'. However, remember that maintenance and reliability function “out of phase.” If an investment today produces improved reliability two years from now. A cutback today results in reduced reliability during the same time period. Make sure that your reliability investments synchronize with the timing of market demand.
The Coronavirus crisis requires a cost-centered asset management strategy. For many plant operators, this will be a shift of their strategy by 180 degrees. To ensure that this process is as successful as possible, we have shown you the crucial areas of action. The most important advice is hidden under point 2, since it directly affects all other aspects.
Otherwise, careless short-circuiting operations jeopardize the ability to reliably run your systems at full load again when demand returns, which it invariably will. Be stringent and, above all, very methodical to utuilize the time your employees spend in the home office to complete or optimize your asset management strategies. This is how you can turn the crisis into an opportunity.